The most common plumbing issues in New York City

Plumbing problems are usually a thing that all NYC homeowners dread. Even the most minor issue can turn into a fixture that costs a few thousand dollars. To avoid unnecessarily spending money, here are the most common plumbing issues in New York City and how to deal with them in the best way.

Do not let a nuisance turn into an emergency

Luckily, the most common plumbing issues in New York City are more of a nuisance. However, if you don’t fix them on time, they will turn into a costly emergency. With that in mind, learn to recognize signs it’s time to upgrade or replace the plumbing in your home and avoid these expenses.

Slow or clogged drains

The main reason why a drain might get clogged is because of hair, gunk, and other materials you use. The best way to deal with it is to try to unclog it immediately. Using bleach usually helps. However, if it turns into a more severe clog, it is best to have your drains cleaned by a professional. They will probably have to use the snake extension to thoroughly clean the drain and remove any clogs.

How to fix the “toilet won’t stop running” issue

One of the most common plumbing issues in New York City is a toilet that won’t stop running. When you flush, it just keeps going in a slow stream, and it won’t stop. This can happen due to multiple reasons:

  • a bad seal;
  • a bad lever;
  • broken chain

Fixing this problem requires a special kit from the hardware store. You will need about ten minutes to resolve the issue. However, if you don’t feel like you could do it properly, it is better to call a certified plumber.

No hot water

You step into the bathroom to take a shower, turn on the showerhead, and you get surprised with a stream of cold water. This unpleasantry is not something you want to experience. Losing hot water is frustrating but also very common in New York City.

First, check if the pipes in your home are warm. If they are not, check the water heater. The pilot light needs to be on, and check if the temperature is set to high. Also, the water heater needs to be the right size for the amount of water you spend. Additionally, make sure there is no mold, moisture on the base, or any loud noises indicating a problem.

When it comes to fixing a water heater, it is always best to call a professional plumber. If you start messing around with these issues, trying to fix them on your own, you could end up with a much more severe problem.

Leaking or dripping faucets

Faucets are the most used parts of any plumbing installment. That’s why it is not that uncommon that you have one that drips or leaks. There might be a couple of different reasons for this to happen.

First, the problem with the o-ring. If it becomes loose or wears out after use, it will not properly hold the faucet handle in place.

Another possible issue is a worn-out washer. This happens mostly because of increased use, as the friction causes it to wear out.

The most dangerous situation is if you have a corroded valve. This will require a replacement. If that happens, have in mind that a corroded valve might mean that you have other issues as well. That usually occurs due to backed-up water. If you have a corroded valve, have a plumber thoroughly inspect your plumbing fixtures.

What happens if you don’t fix these most common plumbing issues in New York City?

If you don’t take care of these minor plumbing issues fast, there could be severe consequences.

First of all, a running toiler can ramp up your water usage, resulting in high utility bills. That can also happen due to any dripping faucet or a water heater.

Another possible issue is to get a backed-up drain. When there is a clog, water backs up and fills the drain until it finds the next place where it can go out. If you have leaking pipes, there is a chance your home might flood. Even more dangerous is that if the pressure is high enough, your pipes might burst. That will cause a lot of water damage, and you will have to spend those thousands of dollars we mentioned at the beginning, and that’s only to fix the issue. Additionally, you will have to purchase new things that got destroyed by water.

Do not mess with these most common plumbing issues in New York City, no matter how small and harmless they may seem.

When moving to NYC, how to make sure your new home does not have plumbing issues?

If you are moving to New York City and buying or renting a place, it is crucial to make sure there are no plumbing issues before you move in. The rent can be high, and real estate here is expensive, to say the least. You will spend a lot of money on getting the home, and there is no need to spend even more on fixing plumbing issues on your first week.

The best way to avoid issues is to use the assistance of relocation experts from the area. Not only will local movers help you relocate quickly, but more importantly, they have connections with real estate agents and subletters inNYC. Through them, you can ask about the state of the apartment or a house and make sure that everything is alright before moving in.

The most common plumbing issues in New York City explained

As you can see, many things can go wrong. The best way to fix these most common plumbing issues in New York City is to call a reputable plumber as soon as possible. Do not allow for a minor nuisance to turn into a major problem, both for your household and your wallet.

 

Meta Description: Discover some common plumbing issues in New York City, and how to prevent them from escalating. Do not risk it on your own, seek professional assistance!

Leave a Reply

Your email address will not be published. Required fields are marked *